I recently purchased a set of Beats Fit Pro headphones, and I was eager to give them a try. My excitement was apparent. But when I connected them for their first charge, I soon discovered that they weren’t getting any at all.
Given the large investment I had made in getting the Beats Fit Pro headphones, a rush of disappointment swept over me. It was upsetting to see that these expensive earphones did not respond to the charging procedure as they should have.
I started on a research mission in the hope to discover a solution. I set out on a quest to solve the secrets of why these earphones weren’t charging properly, along with my thirst for knowledge. Luckily, it functioned for me. So, try the below troubleshooting solution if your Beats Fit Pro is not charging.
Not Charging Beats Fit Pro
It can be upsetting to deal with charging problems with your Beats Fit Pro headphones, especially after spending money on them. Dirt on the charging points or case pins, improper earbud placement inside the case, software bugs, out-of-date firmware, a defective charging case, or poor charging accessories could all be the cause of this issue. Start the troubleshooting process by thoroughly cleaning the earphones’ charging ports and case pins. For proper charging, make sure the earphones fit tightly in the case. If not, think about resetting them. Check for firmware upgrades and, if necessary, replace any defective charging components. By methodically addressing these probable issues, you raise the possibility that your Beats Fit Pro’s charging capabilities will be recovered.
Read on to learn how if you don’t know how to perform each step.
1. Clean Your Earbuds
Because of dirt or debris on its charging poles, your Beats Fit Pro may not be charging. Additionally, constant usage of earphones causes earwax to accumulate on the charging poles. This prevents the current from moving, which prevents the earphones from charging.
You can correct the situation by cleaning your Beats Fit Pro in order to solve this problem. For this task, gather a soft cotton rag, a toothpick, and some rubbing alcohol. Apply the cotton cloth, which has been lightly moistened with rubbing alcohol, to the earphones’ charging terminals. Use the toothpick to carefully remove any collected dirt from the charging poles after that to ensure a thorough cleaning. Finally, remove any leftover material with the cotton cloth. Your Beats Fit Pro should be ready for normal charging again once this cleaning process is finished.
2. Charging Case Pins to be Cleaned
Clean the Skullcandy earbud charging case pins just like you would the earbuds. Your Beats Fit Pro won’t charge if there is dirt on the charging pins because this can also stop current flow. Cleaning the pins on the charging case is thus also crucial.
For cleaning pins, you’ll need a cotton cloth, a toothpick, and rubbing alcohol. A few drops of rubbing alcohol should be placed on a cloth, then the cloth should be applied carefully to the pins.
Then, using a toothpick to remove any remaining debris, wipe the pins with a cloth. Place the earbuds in the case after cleaning the Beats Fit Pro charging poles and case pins; ideally, charging will begin.
3. Place the Earbuds in Case Properly
Incorrect ear tip or earbud placement in the charging case can occasionally prevent your earphones from charging
Make sure the ear tips are properly attached to the earbuds first because they frequently prevent them from sitting comfortably in the charging case. Second, when you put the earphones in the case, make sure the charging poles are in contact with the pins.
Close the charging case lid once everything is properly positioned within. Since the case cover is open, the earphones cannot charge.
4. Reset Earbuds
The Beats Fit Pro occasionally has charging hiccups that are caused by faults or malfunctions in the software. In these situations, executing a reset is advised as the best course of action to address minor problems with the earphones. Make sure the charging case has enough charge before starting this process. Then, put the case back on the two earphones. Press and hold the case’s button for around 15 seconds, or until you notice the LED indication starting to flash alternately in red and white. Your Beats Fit Pro should charge more quickly and smoothly after completing this reset operation, which should help eliminate any software-related issues. Once the reset is complete, see if your earphones begin to recharge.
5. Fault in Charging Case
A fault in the charging case, typically brought on by a broken battery, is commonly to blame for the Beats Fit Pro’s inability to charge. This battery issue reduces the case’s ability to hold a charge, which results in the situation where your earphones aren’t charging. The degeneration of the charging case battery typically results from things like physical damage or moisture intrusion. One option might be to temporarily mitigate the problem by exposing the case to sunshine.
However, it’s possible that the power cable connecting to the battery may have gotten loose when the case was dropped or hit, interrupting the passage of electricity to the case pins. It is advisable to consult a qualified device technician in such circumstances. The best course of action for regaining the functioning of your Beats Fit Pro charging case is professional involvement because attempting to resolve this complex problem on your own at home could be difficult.
6. Charge the Case Properly
Placing the earbuds inside the charging case will ensure optimal charging of your Beats Fit Pro. However, there are times when the charging case itself has trouble charging, which then interferes with charging the earbuds.
It’s critical to carefully manage the billing process in order to remedy this. To ensure compatibility and ideal performance, only charge the case using the original USB cable. Furthermore, create a strong and secure connection by forcefully inserting the charging cable into the appropriate connector on the charging case. Keep the charging cord and the case’s charging port clean as an extra precaution to encourage reliable and effective charging. By following these guidelines, you increase the possibility of your Beats Fit Pro earphones charging seamlessly.
7. Drain Earbuds
One possible fix is to purposefully drain your wireless earbuds’ batteries for a period of 24 hours if you notice that they are not charging fully, leaving your battery levels unchanged even after hours of charging. Minor bugs can be fixed by letting the earphones use all of their battery power at this time.
Start by unpairing and removing the earphones from any connected devices in order to carry out this procedure. The next step is to take both earphones out of the charging case and put them outside for the whole 24 hours. This move causes the earbuds to stay powered on in an effort to pair with the device, ultimately discharging the battery completely.
Re-insert both earbuds into the charging case after the battery is completely depleted for a thorough recharge. Your earbuds’ battery performance may be improved with this strategy.
8. Maintain Temperature of Earbuds
Due to the sensitivity of their lithium-ion batteries to such conditions, your Beats Fit Pro may be unable to charge in extremely cold or hot temperatures.
The first thing to do if your earbuds have stopped charging after being used in conditions such as saunas, steam rooms, or extremely cold temperatures is to bring their temperature back to normal. Leave the Beats Fit Pro in a cool location for 2 to 3 hours to allow them to warm up to room temperature.
After this time, try charging your earphones again because they should work properly now that they have been used to ambient temperature.
9. Charging cable or wall adapter issues
Your charging cord or wall adapter may be broken if your earphones won’t charge. This may prevent your charging case from turning on, leaving your earphones incapable of charging. When the cable is attached, check the LED indicator; if it flashes, the connection is probably in good condition. If not, try a different adaptor and the same cable, or the opposite. Finding the problematic component can help you find the remedy; either a new charging cable or a wall adapter will fix the problem.
Conclusion
There are numerous methods you may take to troubleshoot and perhaps fix the issue if your Beats Fit Pro headphones are having charging problems. Start by cleaning the earphones’ charging poles and the charging case’s pins. Make sure the earbuds are positioned correctly inside the case. If problems continue, think about resetting the earbuds and making sure the case is fully charged. Alternate solutions include changing the firmware or completely draining the earbuds’ battery for 24 hours.
Be aware of any temperature changes that could impair charging efficiency. Examine and maybe replace a bad charging cable or wall adapter if the problem is still present. In the event that these efforts are unsuccessful, contacting Beats customer care is advised. Additionally, returning them for a replacement may be an option if your earbuds are still covered under warranty. You can improve your chances of fixing the charging issue with your Beats Fit Pro headphones by methodically pursuing these options.
Frequently Asked Questions
My Beats Fit Pro Earbuds Don’t Charge at All, Please Help. What Should I Do?
Start by cleaning the charging pins in the charging case and the charging poles on the earbuds. Make sure the earbuds are securely tucked into the case, then try to reset them. Additionally, confirm that the charging case is fully charged.
What Is the Process for Resetting My Beats Fit Pro Earbuds?
Detach the earbuds from any connected devices and perform a repair. To drain the battery, let both earphones outside the case for around 24 hours. After that, put them back in the case and fully charge them.
I Have a Beats Fit Pro; Can I Use Any Charging Cable or Wall Adapter?
To ensure compatibility and the best charging results, it is advised to utilize the original charging cable and wall adapter supplied by Beats.
If My Earbuds Are Still Covered by Warranty and Aren’t Charging Properly, Can I Return Them?
Yes, you can think about returning your earbuds for a replacement or repair if they are still covered by your warranty and you’ve tried a number of troubleshooting techniques without success.
