Skullcandy Push Active Not Charging (How to Fix)

I woke up this morning ready to start my day with some tunes, but when I went to grab my skullcandy push active not charging, I noticed they weren’t charged.

When I plugged them they weren’t charging.

I was so disappointed, because I rely on them for listening to music. However, after hours of research online I found how to fix them.

So, if your Skullcandy Push Active is also not charging try the below troubleshooting ways.

Here Are The Top 7 Best Skullcandy Earbuds

Skullcandy Push Active Not Charging

It’s possible that your Skullcandy Push Active isn’t charging because of dust or debris on the earbuds or the pins of the charging case, or because the earbuds aren’t in the right position in the case. In order to rectify this issue, you will need to clean the charging poles and charging case pins of the earbuds, insert the earbuds into the case in the correct orientation, reset the earbuds, update the firmware, and get a new charging cable or wall adapter.

Detailed explanations of each procedure and instructions for carrying them out follow.

1. Clean Earbuds

It’s possible that your Skullcandy Push Active isn’t charging because dust or debris has accumulated on the charging pins.

Earwax may accumulate on the charging poles of earphones if you use them often. Therefore, electricity cannot flow, and the earphones will not charge.

Therefore, cleaning your Skullcandy Push Active is necessary to resolve this issue. To clean, get some rubbing alcohol, a toothpick, and a clean, soft cotton cloth. Apply some rubbing alcohol to a cotton swab and gently wipe the charging poles of the earphones. Carefully use the toothpick to scrape away any dirt from the charging poles, then finish off by wiping everything down with a cotton rag.

Having done so, your Skullcandy Push Active may be charged.

2. Clean Charging Case Pins

Cleaning the pins in your Skullcandy charging case is the same as cleaning the earphones. As a consequence, your Skullcandy Push Active may not charge if dirt has accumulated on the charging pins.

Therefore, it is also necessary to clean the charging case pins. To disinfect pins, you’ll need rubbing alcohol, a cotton swab, and a toothpick. Put some rubbing alcohol on a cloth and use it to wipe the pins down. Then, use a toothpick to remove the dirt and wipe the pins clean.

Once you’ve cleaned the charging poles and case pins for your Skullcandy Push Active headphones, you can put the earbuds in the case and hopefully, they’ll begin charging.

3. Properly Place in the Case

Incorrect insertion of the ear tips or the earbuds into the charging case might prevent charging.

whether the earphones aren’t fitting properly in the charging case, check to see whether the ear tips are in the right spot.

Second, while recharging your earphones, insert them into the case such that the charging poles touch the pins. Close the cover of the charging case after inserting it in the right orientation. Because opening the casing prevents charging of the earphones.

4. Reset Skullcandy Push Active

Due to software problems, the Skullcandy Push Active may unexpectedly cease charging. To repair minor issues with your earphones, a reset is your best bet. This is why it is necessary for you to reset your Skullcandy Push Active.

The Skullcandy Push Active may be reset in the following ways. Put your wireless headphones away and turn off Bluetooth. Take out your earbuds from their case to activate both of them.

Next, for three seconds, push and hold the right earbud. When you hear the tone or see the purple flash on the right ear bud three times, press the release button.

5. Faulty Charging Case

There is a problem with the charging case, thus your Skullcandy Push Active won’t charge. Most of the time, a damaged battery indicates a defective charging cover.

Since the battery in the case is destroyed, you will not be able to charge your earphones. The battery in your charging case probably won’t operate if it gets wet or becomes broken. Thus, to repair, put the case in direct sunshine for a while.

On the other hand, if you have dropped the case, the power line may no longer be attached to the battery, preventing electricity from reaching the case’s terminals. A trip to a device technician is in order. He’ll get it working again in no time, unlike if you tried to do it yourself at home.

6. Properly Charge Case

When placed in the charging case, your Skullcandy Push Active will automatically begin charging. But there are occasions when the earphones won’t charge because the case isn’t doing its job.

You must thus file the appropriate charges. Therefore, while charging the case, only use the included USB cable. The charging cable should be inserted into the charging case port with plenty of force. A spotless charging cord and docking station on the case.

7. Drain Earbuds

Your battery life won’t improve no matter how long you charge your penny earphones if they aren’t being fully charged.

Then, for a whole day, you should listen to your earbuds nonstop. This will ensure that earphones use the full battery life of your device and fix any nitpicky issues. The first step is to disconnect the headphones from each electronic gadget. Then, for a full day without the casing, leave both headphones unplugged.

In doing so, the earphones’ battery would run out entirely as they constantly seek the smartphone to link with. After using all the power in the buds, return them to their carrying case to recharge.

8. Update Firmware

Skullcandy Push Active earbuds that won’t charge? It might be because you’re using an older version of the firmware, which has been known to fix bugs and improve performance.

So, change the firmware on your Skullcandy Push Active headphones if you haven’t already.

To get the latest firmware, download the Skullcandy app.
After that, connect your headphones to the device.
Launch the app and tap the product card’s update button.
You should have it installed if you can.

What to do if a software update fails.

If you are having trouble updating the firmware on your Skullcandy Push Active, try these troubleshooting steps.

Make sure your headphones have at least 25% battery life before attempting the update.
You should have a reliable internet connection on your device.
Having at least 30% battery life is recommended.
You may use the Skullcandy app to sync your earbuds with your mobile device.

9. Maintain Temperature of Earbuds

If you leave your Skullcandy Push Active in very cold or hot conditions, it may cease charging. They rely on lithium-ion batteries, which malfunction in very cold or very hot conditions.

Use caution if your earphones have been exposed to extreme heat or cold.

Because of it, they had ceased collecting. Therefore, the first step is to let your Skullcandy Push Active return to ambient temperature. You should use the headphones for at least three hours. You should then attempt to charge your headphones.

10. Faulty Charging Cable or Wall Adapter

If your earphones won’t charge, it might be because of a defective cable or power supply.

Your earphones aren’t being juiced up because of the malfunctioning charging cable or wall charger. Connecting the charging cord to the case and checking the LED light is the first step.

If it’s blinking while charging, there’s no problem with the cord. However, if the LED on your charging case is not blinking, there is a problem with the charging cable or wall adapter.

If the current wall adapter and cable aren’t working, consider swapping them out and seeing if it solves the problem. You may isolate the source of the problem in this manner. If your charging cable or wall charger is broken, you should get a new one.

Conclusion

The following are some things to try if your Skullcandy Push Active is not charging.

The first step is to clean the charging poles and pins of the earbud housing. The earphones need to be inserted into the charging case the right way.

• Headphones need to be reset.
• Be sure to charge the charging case correctly.
• Earbuds should be drained for a whole day.
• Upgrade the earbuds’ software.
• The use of temperature maintenance may not be practical.
• The charging cable or wall charger may need to be replaced.

If you’ve tried these solutions and they haven’t worked, then it’s time to get in touch with Skullcandy’s support team. You may also exchange the headphones for a new set if the guarantee still applies.