The new Skullcandy Jib True wireless earbuds caught my attention a week ago, and I eagerly charged the case in preparation for my aural adventure. The earbuds delivered excellent sound and stayed faithful to their stylish style in the early going, which was a treat. After only a week of use, the earbuds and the case both refused to charge, which unexpectedly dampened my enthusiasm. The earbuds’ appeal was still powerful, but their functionality had been stolen, leaving the user indignant. I dove into online resources, determined to troubleshoot and resuscitate the silent friends that had momentarily enhanced my days, driven by a desire to bring them back to their former splendor.
It was a difficult trip to regain their functionality, but my perseverance helped me find a solution. I was able to find the reason for the charge problem and effectively fix it thanks to thorough study and some trial and error. My admiration for the earphones’ qualities was revived as a result of this encounter, which also gave me a renewed sense of empowerment. I couldn’t help but be in awe of how technology and individual work came together to restore the immersive experience I had so eagerly embraced as the sound quality reverberated through the revived earbuds.
So, if you are in the same situation try the below troubleshooting steps,
Skullcandy Jib Not Charging
If your Skullcandy Jib True isn’t charging, it may be because of dust on the charging poles and case pins, computer errors, or improper bud insertion into the case.
Cleaning the charging poles and pins, resetting the earphones, and properly inserting the earbuds into the case are all steps you must take to solve this issue. If you are still confused what to do in each step then read on the following article;
1. Clean your Skullcandy Jib
Cleaning the charging poles may help if your Skullcandy Jib earbuds aren’t charging even after spending a lot of time in the charging case. When earbud charging poles are covered in dirt or debris, charging problems frequently occur. The buildup of dirt on these poles prevents them from properly connecting with the pins on the charging case, which leads to failed charging attempts. Get a cotton cloth, a toothpick, and rubbing alcohol for the cleaning procedure to take care of this.
Put a few drops of rubbing alcohol on the cotton cloth and massage it against the charging poles gently to start. The accumulated dirt is successfully removed by this action. Next, gently remove any leftover dirt off the poles with the soft toothpick. Finish off by using the cloth to clean the poles once more. Be cautious while cleaning in order to prevent accidental harm to your earbuds. Your Skullcandy Jib earphones may once again function properly after doing this quick maintenance task, which will also guarantee optimum charging efficiency.
2. Clean your Charging Case
Additionally, dust on the charging case pins prevents current passage, which prevents earphones from charging. So you should also clean the pins on the charging case. Put a little rubbing alcohol on a cotton cloth and clean the charging case pins with it.
Place the earbuds in the case after cleaning the charging case pins and earbud charging poles. They’ll start making a charge.
3. Reset Your Skullcandy Jib
It’s advised to reset your Skullcandy Jib earphones if cleaning them and their charging case in an attempt to fix the charging problem hasn’t worked. There are times when earphones may not charge properly as a result of underlying flaws or systemic issues. You may efficiently get rid of any potential issues and improve the earphones’ use by resetting them.
This procedure acts as a practical troubleshooting step, fixing any technical issues that may be impeding the charging procedure and reestablishing your Skullcandy Jib earbuds’ proper charging capability.
For help resetting your Skullcandy Jib, see the procedures below.
4. Insert Items Suitably in Case
Sometimes earphones won’t charge if they are positioned incorrectly in the charging case. As a result, you need to make sure their ear tips are attached to the earbuds properly. Because ear tips frequently prevent earbuds from fitting properly in the charging case.
In order for the charging poles of the earphones to connect with the pins on the charging case, they must be positioned correctly.
From a dead battery, Skullcandy Jib will take an hour to fully charge. The LEDs on the earbuds will turn solid red when they are charging. Additionally, their LEDs turn off after they are fully charged.
Troubleshooting: Skullcandy Jib Case Not Charging
Your Skullcandy Jib True case may not charge as a result of a filthy charging port, the use of an unofficial charging cable, or a defective charging cable. You will need to utilize the original charging cable, clean the charging port, and replace the defective charging cable in order to troubleshoot this.
1. Clean Your Charging Port
The Skullcandy Jib case’s charging problems are frequently caused by the buildup of dirt in the charging port, which happens when the charging cable doesn’t fit tightly into the port because of frequent use. The charging process is hampered by the accumulation of dirt and debris, rendering the charging case useless. Cleaning the charging case port is one way to solve this issue. Make sure to thoroughly clean the charging port by carefully removing dirt with a cotton swab. Reconnect the charger to the case when you’ve finished cleaning it, and you should see that normal charging capability has been restored.
2. Cable Chargings should be Original
Since most original charging cords are of a certain length, this problem frequently arises, forcing many people to use extensions or aftermarket cables to charge their Skullcandy Jib case. Due to the incompatibility of these cords with the case’s design, this method could cause the case to either not charge at all or to take longer than usual. Stick with the original charging cable provided, as it is designed for seamless connectivity with your Skullcandy Jib case, to ensure efficient and dependable charging.
3. PC in sleep Mode
Make sure the PC, Xbox, or PS4 are not in sleep mode if you plan to charge the case with one of those devices.
Due to the fact that you might occasionally put the case into your PC when it is sleeping, the case won’t charge even after being plugged in for several hours. Make sure your computer is operational before plugging in the charging case.
4. Check Your Charging Cables
The problem with the charging of the case may also be caused by a defective charging cord. When charging cords are routinely twisted, they typically stop working.
So make sure your charging cord is working by connecting to another one. If the new cable allows the case to begin charging, your damaged cable has been found. The ideal option would be for you to get a fresh charging wire.
Conclusion
Your next course of action should involve contacting the Skullcandy support staff for additional assistance if the offered methods fail to successfully resolve the problem. Additionally, you might be able to start a return process if your earphones are still covered by warranty. If you think this information is helpful, please let us know and pass it along to others who might be having a similar issue.
Frequently Asked Questions
My Skullcandy Jib True earphones and case aren’t charging, so why?
There could be a number of causes for this problem. It could be caused by a buildup of debris in the charging ports, the use of unapproved charging connections from third parties, or mechanical issues. Utilizing the original charging cord that was provided, start by cleaning the charging ports.
How do I clean my earphones’ and case’s charging ports?
A cotton swab can be used to gently remove dirt and debris from the charging ports. Before trying to charge again, make sure the ports are dry.
Can I charge my Skullcandy Jib case with charging wires from other brands?
It is advised to use the charging cable that came with the device since third-party cables may not be compatible and cause charging problems.
My case and earbuds are still having charging issues. What ought I to do?
If cleaning and using the original cable don’t fix the issue, think about contacting Skullcandy’s support staff for additional guidance. Depending on your circumstance, they can offer particular advice.
